Cisco UCS 5108 Blade Server Chassis 6U Grey network equipment chassis

Manufacturer part number UCS-MINI-SEED-5108
Vendor Cisco
The Cisco Unified Computing System™ (Cisco UCS®) is a next-generation data center platform that unites computing, networking, storage access, and virtualization resources into a cohesive system designed to reduce total cost of ownership (TCO) and increase business agility. The system integrates a low-latency, lossless 10 Gigabit Ethernet unified network fabric with enterprise-class, x86-architecture servers. The system is an integrated, scalable, multichassis platform in which all resources participate in a unified management domain.

With the introduction of the Cisco UCS 6324 Fabric Interconnect, the management flexibility and cable reduction of the full-scale Cisco UCS solution is now available in a single-chassis implementation. The Cisco UCS 6324 Fabric Interconnect allows a single Cisco UCS chassis to be managed and configured in the same way as a full-scale Cisco UCS solution, providing the advantages of Cisco UCS to smaller businesses and remote sites.

The Cisco UCS 5100 Series Blade Server Chassis is a crucial building block of the Cisco Unified Computing System, delivering a scalable and flexible blade server chassis for today’s and tomorrow’s data center while helping reduce TCO.
The Cisco UCS 5108 Blade Server Chassis (Figure 2) is six rack units (6RU) high and can mount in an industry-standard 19-inch rack. A chassis can house up to eight half-width Cisco UCS B-Series Blade Servers and can accommodate both half-width and full-width blade form factors.
Four hot-swappable power supplies are accessible from the front of the chassis, and single-phase AC, –48V DC, and 200 to 380V DC power supplies and chassis are available. These power supplies are up to 94 percent efficient and meet the requirements for the 80 Plus Platinum rating. The power subsystem can be configured to support nonredundant, N+1 redundant, and grid-redundant configurations. The rear of the chassis contains eight hot-swappable fans, four power connectors (one per power supply), and two I/O bays that can support either Cisco UCS 2000 Series Fabric Extenders or the Cisco UCS 6324 Fabric Interconnect. A passive midplane provides up to 80 Gbps of I/O bandwidth per server slot and up to 160 Gbps of I/O bandwidth for two slots. The chassis is capable of supporting future 40 Gigabit Ethernet standards.

The Cisco UCS 5108 Blade Server Chassis revolutionizes the use and deployment of blade-based systems. By incorporating unified fabric, integrated, embedded management, and fabric extender technology, Cisco UCS allows the chassis to use fewer physical components, has no need for independent management, and enables greater energy efficiency than traditional blade server chassis. This simplicity eliminates the need for dedicated chassis management and blade switches, reduces cabling, and enables Cisco UCS to scale to 20 chassis without adding complexity. The Cisco UCS 5108 chassis is a critical component in delivering the Cisco UCS benefits of data center simplicity and IT responsiveness.

In addition, the Cisco UCS 5108 chassis has the architectural advantage of not having to power and cool excess switches in each chassis. With a larger power budget per blade server, Cisco can design uncompromised expandability and capabilities in its blade servers, as evidenced by the new Cisco UCS B200 M3 Blade Server, with its leading memory slot and drive capacity, and the Cisco UCS B230 M2 Blade Server, with its industry-leading 32-DIMM memory density in a half-width form factor.
Certificates
Electromagnetic emissions 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR2 2 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A
RoHS compliance Y
Electromagnetic emissions 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR2 2 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A
Safety UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, GB4943
Certification CE, 2004/108/EC, 2006/108/EC
RoHS compliance Y
Safety UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, GB4943
Certification CE, 2004/108/EC, 2006/108/EC
Networking
Cabling technology 10BASE-KR
Cabling technology 10BASE-KR
Operational conditions
Operating relative humidity (H-H) 10 - 90%
Storage relative humidity (H-H) 5 - 93%
Operating temperature (T-T) 10 - 35 °C
Storage relative humidity (H-H) 5 - 93%
Operating temperature (T-T) 10 - 35 °C
Storage temperature (T-T) -40 - 65 °C
Operating altitude 0 - 3000 m
Operating altitude 0 - 118110.2" (0 - 3000 m)
Operating relative humidity (H-H) 10 - 90%
Storage temperature (T-T) -40 - 65 °C
Ports & interfaces
Expansion slots 2
I/O ports 2x QSFP+, 8x SFP+, 2x USB, 2x Ethernet, 2x Console
Expansion slots 2
I/O ports 2x QSFP+, 8x SFP+, 2x USB, 2x Ethernet, 2x Console
Power
Power requirements AC
Power requirements AC
Technical details
Noise level 68.8 dB
Switching capacity 512 Gbit/s
Number of slots 10
Ports quantity 16
Switching capacity 512 Gbit/s
Hot-Plug support Y
Data transfer rate 9.95328 Gbit/s
Maximum load weight 115.66 kg
Switch models Nexus 1000V, Microsoft's Hyper-V
Color of product Grey
Number of bays 2
Dimensions (WxDxH) 445 x 812 x 267 mm
Size 19"
Material Steel
MAC address table 20000 entries
Front connections 10BASE-KR
Front connections 10BASE-KR
Hot-Plug support Y
Mounting Rack
Number of fans 8 fan(s)
Frame type Open frame
Latency 0.1
Power supply slots open Y
Power consumption (typical) 1 W
Rack capacity 6U
Electromagnetic immunity EN50082-1, EN61000-6-1, EN55024, CISPR24, EN300386, KN 61000-4 Series
Weight (imperial) 90
Frame type Open frame
Dimensions (WxDxH) 17.5 x 32 x 10.5" (445 x 812 x 267 mm)
Maximum capacity 9.6
Size 48.3 cm (19")
Number of bays 2
Compatible products UCS 2208XP, UCS 2204XP, UCS 2104XP, UCS-FI-M-6324
Material Steel
Standard fans Hot-swapp
Data transfer rate 9.95328 Gbit/s
Ports quantity 16
MAC address table 20000 entries
Maximum load weight 255 lbs (115.7 kg)
Compatible products UCS 2208XP, UCS 2204XP, UCS 2104XP, UCS-FI-M-6324
Locking Y
Standard fans Hot-swapp
Throughput 1.2TB
Weight (imperial) 90
Mounting Rack
Management platform UCS
Maximum capacity 9.6
Switch models Nexus 1000V, Microsoft's Hyper-V
Number of fans 8 fan(s)
Power consumption (typical) 1 W
Power supply slots open Y
Compatible operating systems vSphere 5.1.x, 5.5, Windows 2008 R2, 2012, 2012 R2,, RHEL 6.x, 7.x, SUSE Linux 11.x, 12.x, OL 6.x, 7.x, OVM 3.3.x, Citrix XenServer 6.x, Ubuntu 12.x, 14.x
Operating temperature (T-T) 50 - 95 °F
Electromagnetic immunity EN50082-1, EN61000-6-1, EN55024, CISPR24, EN300386, KN 61000-4 Series
Rack capacity 6U
Noise level 68.8 dB
Throughput 1.2TB
Compatible operating systems vSphere 5.1.x, 5.5, Windows 2008 R2, 2012, 2012 R2,, RHEL 6.x, 7.x, SUSE Linux 11.x, 12.x, OL 6.x, 7.x, OVM 3.3.x, Citrix XenServer 6.x, Ubuntu 12.x, 14.x
Number of slots 10
LED indicators Alarm, Fan fail, LAN, Link, Operation, Power, Temperature
Management platform UCS
Operating temperature (T-T) 50 - 95 °F
Required software SLES-11, SLES-CA-1A, SLES-CA-3A
LED indicators Alarm, Fan fail, LAN, Link, Operation, Power, Temperature
Colour of product Grey
Latency 0.1
Required software SLES-11, SLES-CA-1A, SLES-CA-3A
Locking Y
Weight & dimensions
Height 10.5" (267 mm)
Width 17.5" (445 mm)
Depth 32" (812 mm)
Weight 89.9 lbs (40.8 kg)
Weight 40.8 kg
Width 445 mm
Depth 812 mm
Height 267 mm
Supermicro SBE-714D-D32 computer case
SBE-714D-D32 - Enclosure chassis with two 1620W power supplies
Loading price
Hewlett Packard Enterprise Integrity BL890c i4 c7000 Server Blade server
HP Integrity BL890c i4 c7000 Server Blade
Loading price
Hewlett Packard Enterprise Integrity BL870c i4 c7000 Server Blade server
HP Integrity BL870c i4 c7000 Server Blade
Loading price